INDIAN INSTITUTE OF TECHNOLOGY MADRAS

Publications

2022

Electrospun 1D Ta3N5 -(O) nanofibers as advanced electrocatalysts for hydrogen evolution reaction in proton exchange membrane water electrolyser - Raghunath SharmaMukkavilli, Arun Ichangi, Ganesh BabuThiyagarajan, Florian Vollnhals, Michael Wilhelm, Aman Bhardwaj, Silke Christiansen, Lakshman Neelakantan, SanjayMathur, RaviKumar

Open Ceramics, Volume 10,

Impact Factor:-

Synthesis and Temperature-Dependent Evolution of the Phase Composition in Palladium-Containing Silicon Oxycarbide Ceramics - Kousik Papakollu, NirajaMoharan, K.C.Hari Kumar, StefanLauterbach, Hans-JoachimKleebe, EmanuelIonescud, RaviKumar

Journal of the European Ceramic Society,

Impact Factor:5.302

Bidirectional Actuation of Silk Fibroin Films: Role of Water and Alcohol Vapors - Manikandan Ganesan, Ravi Kumar, and Dillip K. Satapathy

langmuir , 38, 19, 6066–6075,

Impact Factor:3.882

Mechanical characterization of spark plasma sintered titania-silicon oxycarbide (TiO2/SiOC)nanocomposites - E.W.Awin, K.C.H.Kumar, S. Bernard, R. Kumar

Materialwiss. Werkstofftech,

Impact Factor:-

Self-supported amorphous TaNx(Oy)/nickel foam thin film as an advanced electrocatalyst for hydrogen evolution reaction - Ganesh Babu Thiyagarajan, Raghunath Sharma Mukkavilli, David Graf, Thomas Fischer, Michael Wilhelm, Silke Christiansen, Sanjay Mathur and Ravi Kumar

Chemical Communication,

Impact Factor:6.222

Space-charge polarisation dielectric behaviour of precursor derived monoclinic HfO2 - S.S. LokeshVendra, NoelAntony, EkaterinaKoroleva, AlexeyFilimonov, SergeyVakhrushev RaviKumar

Ceramics International,

Impact Factor:4.527

Mechanical response and thermal expansion characteristics of spark plasma sintered Zr–La–B–C(O)-based precursor-derived ceramics - Gokul Nanda, Nithin Chandran, Ganesh Babu Thiyagarajan, Renjith Devasia and Ravi Kumar

Advances in Applied Ceramics,

Impact Factor:2.00

Multifunctional, environmental coatings on AA2024 by combining anodization with sol-gel process - M.Arunodaya, K. PradeepPremkumar, RaviKumar, R.Subasri

Ceramics International,

Impact Factor:4.527

Synthesis and Temperature-Dependent Evolution of the Phase Composition in Palladium-Containing Silicon Oxycarbide Ceramics Kousik Papakollu Niraja Moharana K.C.Hari Kumar Stefan Lauterbach Hans-Joachim Kleebe Emanuel Ionescu Ravi Kumar

Journal of the European Ceramic Society,

Impact Factor:5.302

Electrospun 1D Ta3N5 -(O) nanofibers as advanced electrocatalysts for hydrogen evolution reaction in proton exchange membrane water electrolyser Raghunath Sharma Mukkavilli Arun Ichangi Ganesh BabuThiyagarajan Florian Vollnhals Michael Wilhelm Aman Bhardwaj Silke Christiansen Lakshman Neelakantan Sanjay Mathur Ravi Kumar

Open Ceramics,

Impact Factor:-

Bidirectional Actuation of Silk Fibroin Films: Role of Water and Alcohol Vapors Manikandan Ganesan, Ravi Kumar, and Dillip K. Satapathy

Langmuir 2022, 38, 19, 6066–6075 Publication,

Impact Factor:3.882

2021

Exclusive Papers of the Editorial Board Members (EBMs) of the Materials Chemistry Section of Molecules

Page No: 57,

Impact Factor:-

Microstructure dependent ablation behaviour of precursor derived SiOC ceramic foam for high temperature applications - Pradhyun Veerapanaicker Soundaraj, Santhosh Sivan Sembulingam, Ganesh Babu Thiyagarajan, Niraja Moharana, K.C. HariKumar,RaviKumar

Journal of the European Ceramic Society,

Impact Factor:4.495

Microstructural transitions in camphene-based freeze casted ceria: effect of primary building blocks - Raghunath Sharma Mukkavilli, Kousik Papakollu & Ravi Kumar

Advances in Applied Ceramics,

Impact Factor:1.89

TiNb2O7-Keratin derived carbon nanocomposites as novel anode materials for high-capacity lithium-ion batteries - Ganesh, BabuThiyagarajan, VasuShanmugam, MichaelWilhelm, SanjayMathur, Sahana B.Moodakare, RaviKumar

Open Ceramics, Volume 6,

Impact Factor:-

The role of brass texture on the deformation response of 7075-T651 aluminum alloy under equi-biaxial tension - Nedunchezhian Srinivasan, R.Velmurugan, Lalith Kumar Bhaskar, Satish Kumar Singh, Bhanu Pant and Ravi Kumar

Materials Science and Engineering: A,

Impact Factor:4.652

A Chaotic Potential of Charged Dislocations in Group III-Nitride Heterojunctions - V. B. Bondarenko, A. V. Filimonov and Ravi Kumar

Technical Physics Letters,

Impact Factor:0.791

Effect of iodine doping on the electrical, thermal and mechanical properties of SnSe for thermoelectric applications - Amit Das, Avnee Chauhan, Vikrant Trivedi, Minati Tiadi, Ravi Kumar, Manjusha Battabyal and Dillip K. Satapathy

Physical Chemistry Chemical Physics (RSC),

Impact Factor:3.43

Rapid Moisture-Responsive Silk Fibroin Actuators - Ganesan Manikandan, Aathira Murali, Ravi Kumar, and Dillip K. Satapathy

American Chemical Society - Applied Materials & Interfaces,

Impact Factor:8.758

Design and development of a miniaturized multiaxial test setup for in situ x-ray diffraction experiments - Lalith Kumar Bhaskar, Gobind Kumar, Nedunchezhian Srinivasan and Ravi Kumar

Review of Scientific Instruments,

Impact Factor:1.5867

Combustion synthesis of luminescent Eu-doped single phase Mayenite - T Kumaresh, Eranezhuth Wasan Awin, Lalith Kumar Bhaskar, Marija Prekajski Djordjevic, Branko Matovi?, Ravi Kumar

Journal of Solid State Chemistry,

Impact Factor:3.498

Novel class of precursor-derived Zr–La–B–C(O) based ceramics containing nano-crystalline ultra-high temperature phases stable beyond 1600 °C - GokulNanda, Ganesh BabuThiyagarajan, KC HariKumar, RenjithDevasi, RaviKumar

Ceramics International,

Impact Factor:3.83

2020

Metal-like thermal conductivity possessed by atmosphere assisted synthesis of spark plasma sintered mayenite (Ca12Al14O33) - Teslin Johnson, Eranezhuth Wasan Awin, Branko Matovic and Ravi Kumar

Journal of Innovative Materials in Extreme Conditions,

Impact Factor:-

Ultra-low thermal expansion behavior of spark plasma sintered Sn- doped ZrMo 2 O 8 - Jayanth R Ramamurthy, Ravi Kumar

The International Journal of Ceramic Engineering & Science,

Impact Factor:-

Low frequency dielectric behavior and AC conductivity of polymer derived SiC (O)/HfCxN1-x ceramic nanocomposites; Eranezhuth Wasan Awin, Soumya Sridar, Adhimoolam Bakthavachalam Kousaalya, SS Lokesh Vendra, Ekaterina Koroleva, Alexey Filimonov, Sergey Vakhrushev and Ravi Kumar

Materials Chemistry and Physics,

Impact Factor:3.408

In-Situ Synthesis and Characterization of Nanocomposites in the Si-Ti-N and Si-Ti-C Systems -Maxime Balestrat, Abhijeet Lale , André Vinícius Andrade Bezerra, Vanessa Proust, Eranezhuth Wasan Awin, Ricardo Antonio Francisco Machado, Pierre Carles, Ravi Kumar, Christel Gervais and Samuel Bernard.

Molecules,

Impact Factor:3.267

Tailorable dielectric performance of niobium modified poly (hydridomethylsiloxane) precursor derived ceramic nanocomposites - GB Thiyagarajan, E Koroleva, A Filimonov, S Vakhrushev, R Kumar

physica status solidi (a),

Impact Factor:2.291

Highly active, robust and reusable micro-/mesoporous TiN/Si3N4 nanocomposite-based catalysts for clean energy: Understanding the key role of TiN nanoclusters and amorphous Si3N4 matrix in the performance of the catalyst system - AbhijeetLalea, Maira DebarbaMallmann, ShotaroTada, AlinaBruma, SaimÖzkarn ,RaviKumar, MasaakiHaneda, Ricardo AntonioFrancisco Machado, YujiIwamoto, Umit B.Demirci, SamuelBernarda

Applied Catalysis B: Environmental,

Impact Factor:16.683

Machine Learning Application for Prediction of Sapphire Crystals Defects- YV Klunnikova, MV Anikeev, AV Filimonov, R Kumar

Journal of Electronic Science and Technology,

Impact Factor:-

Disordered mesoporous polymer derived N-doped TiO2/Si-O-C-N nanocomposites with nanoscaled heterojunctions towards enhanced adsorption and harnessing of visible light, Eranezhuth Wasan Awin, Abhijeet Lale, K. C. Hari Kumar, Samuel Bernard and Ravi Kumar

Applied Surface Science,

Impact Factor:5.155

Mechanical behaviour of polymer derived ceramics – a review, Ravindran Sujith, Sudagar Jothi, Andre Zimmermann, Fritz Aldinger and Ravi Kumar

International Materials Reviews,

Impact Factor:21.086

Critical role of cationic local stresses on the stabilization of entropy stabilized transition metal oxides, Lalith K. Bhaskar Varatharaja Nallathambi and Ravi Kumar

Journal of the American Ceramic Society,

Impact Factor:3.094

Temperature dependent conductivity and broadband dielectric response of precursor-derived Nb2O5, Gokul Nanda, Eranezhuth Wasan Awin, Tatiana Gasyak, Ekaterina Koroleva, Alexey Filimonov, Sergey Vakhrushev, Ravindran Sujith and Ravi Kumar

Ceramics International,

Impact Factor:3.45

Design of nanoscaled heterojunctions in precursor-derived t-ZrO2/SiOC(N) nanocomposites: Transgressing the boundaries of catalytic activity from UV to visible light, Shakthipriya Bhaskar, Eranezhuth Wasan Awin, K. C. Hari Kumar, Abhijeet Lale, Samuel Bernard and Ravi Kumar

Scientific Reports,

Impact Factor:4.122

Texture strengthening and anisotropic hardening of mill annealed Ti-6Al-4V alloy under equi-biaxial tension - Nedunchezhian Srinivasan, R Velmurugan, Satish Kumar Singh, Bhanu Pant, Ravi Kumar

Materials Characterization,

Impact Factor:3.562

Bi2Se3-PVDF composite: A flexible thermoelectric system - Ashutosh Kumar, Ravi Kumar, Dillip K Satapathy

Physica B: Condensed Matter,

Impact Factor:1.880

2019

Friction Welding of Electron Beam Melted gamma-TiAl Alloy Ti-48Al-2Cr-2Nb, G. S. Sankar, M. Karthik, Ashfaq Mohammad,Ravi Kumar,G. D. Janaki Ram

Transactions of the Indian Institute of Metals, (2018),,

Impact Factor:0.9

Microstructure and Mechanical Characterization of Friction-Stir-Welded 316L Austenitic Stainless Steels, R. Ramesh,I. Dinaharan,Ravi Kumar, E. T. Akinlabi

Materials Science and Engineering: A,

Impact Factor:1.34

Charge transport mechanism and thermoelectric behavior in Te:(PEDOT:PSS) polymer composites, Ashutosh Kumar, Manjusha Battabyal, Avnee Chauhan, G Suresh, R Gopalan, N V Ravi Kumar and Dillip K Satapathy

Materials Research Express,

Impact Factor:1.449

Anomalous reduction in the band gap of zirconium titanate based composites, Wasan Awin Eranezhuth, Subhendra Keshari Sahoo and Ravi Kumar

Materials Letters,

Impact Factor:3.019

Thermodynamic modelling of Al-B-N system, Soumya Sridar, Ravi Kumar and K. C. Hari Kumar

Calphad,

Impact Factor:2.652

Thermal Shock Resistance of Precursor Derived Si-Hf-C-N(O) Foams, Soumya Sridar, Eranezhuth Wasan Awin, Adhimoolam Bakthavachalam Kousaalya and Ravi Kumar

Transactions of the Indian Ceramic Society,

Impact Factor:1.014

High-magnetostriction Laves-phase alloy of the samarium-iron system: the structure and phase transformations, GA Politova, A Yu Karpenkov, TP Kaminskaya, MA Ganin, Ravi Kumar and AV Filimonov

Physics and Mathematics,

Impact Factor:-

2018

In situ age hardening and grain refinement in as-sprayed Al-Sc binary alloy deposits, N Raghukiran, R Sujith, H Agrawal, R Shabadi, R Kumar

Journal of Alloys and Compounds,

Impact Factor:4.175

Residual stress gradient and relaxation upon fatigue deformation of diamond-like carbon coated aluminum alloy in air and methanol environments, Nedunchezhian Srinivasan, Lalithkumar B,Sergio Baragetti,Ravi Kumar,

Materials & Design,

Impact Factor:5.77

Plasmon enhanced visible light photocatalytic activity in polymer-derived TiN/Si-O-C-N nanocomposites, Eranezhuth Wasan Awin, Abhijeet Lale, Hari Kumar, Umit B Demirci, Samuel Bernard,Ravi Kumar,

Materials & Design,

Impact Factor:5.77

Dominating role of crystal structure over defect chemistry in black and white zirconia on visible light photocatalytic activity, Sri Ramya Teeparthi, Eranezhuth Wasan Awin,Ravi Kumar,

Scientific reports,

Impact Factor:4.122

Novel Precursor-Derived Meso-/Macroporous TiO2/SiOC Nanocomposites with Highly Stable Anatase Nanophase Providing Visible Light Photocatalytic Activity and Superior Adsorption of Organic Dyes, Eranezhuth Wasan Awin, Abhijeet Lale, Kollamala Chellappan Nair Hari Kumar, Umit Bilge Demirci, Samuel Bernard, Ravi Kumar,

Materials,

Impact Factor:2.728

Thermodynamic optimization of Si-Zr-N system using Calphad approach coupled with ab initio methods- S Sridar, R Kumar, KCH Kuma

Calphad,

Impact Factor:2.652

Synthesis and characterization of porous tungsten carbide with added tungsten silicides - Jelena Lukovi?, Dubravka Milovanovi?, Ravi Kumar, Mirjana Kijev?anin, Ivona Radovi?, Branko Matovi?, Tatjana Volkov-Husovi?

International Journal of Refractory Metals and Hard Materials,

Impact Factor:2.794

2017

New method for constructing a visibility graph-network in 3D space and a new hybrid system of modeling - Matej Babi, Ladislav Hluchy, Peter Krammer, Branko Matovi, Ravi Kumar, Pavel Kova

Computing and Informatics,

Impact Factor:0.524

Sintering behaviour, microstructural characterisation and thermal expansion properties of Sn substituted ZrMo2O8, Jayanth R.Ramamurthy, Roy Johnson, Ravi Kumar,

Ceramics International,

Impact Factor:3.02

Influence of Texture and Environmental Effects on Fatigue Behavior of Ti-6Al-4V Alloy, Sergio Baragetti, Nedunchezhian Srinivasan, Ravi Kumar,

Key Engineering Materials,

Impact Factor:0.39

Influence of Environment, Residual Stresses on the Fatigue Behavior of 7075-T6 Aluminum Alloy, Sergio Baragetti, Nedunchezhian Srinivasan, Lalithkumar B, Ravi Kumar,

Key Engineering Materials,

Impact Factor:0.39

Microstructure and mechanical characterization of friction stir welded high strength low alloy steels, R. Ramesha,I. Dinaharan,Ravi Kumar, E.T. Akinlabi,

Materials Science and Engineering: A,

Impact Factor:2.647

Thermodynamic modelling of Ti-Zr-N system, Soumya Sridar,Ravi Kumar,K.C. Hari Kumar,

Calphad,

Impact Factor:2.129

Electroless Deposition of Nanolayered Metallic Coatings - J Sudagar, R Tamilarasan, U Sanjith, R Rajendran, R Kumar

Nanoscaled Films and Layers,

Impact Factor:-

2016

Deformation behavior of commercially pure (CP) titanium under equi-biaxial tension - Nedunchezhian Srinivasan, R Velmurugan, Ravi Kumar, Satish Kumar Singh, Bhanu Pant

Journal Materials Science and Engineering: A,,

Impact Factor:4.652

Mechanical properties of ultra-high pressure sintered sphene (CaTiSiO5), Eranezhuth Wasan Awin, Branko Matovic, Jelena Pantic, Vladimir Urbanovich,Ravi Kumar,

Processing and Application of Ceramics,

Impact Factor:0.944

Organosilicon polymer-derived mesoporous 3D silicon carbide, carbonitride and nitride structures as platinum supports for hydrogen generation by hydrolysis of sodium borohydride, Abhijeet Lale,Ravi Kumar,Umit Bilge Demirci, Philippe Miele, Awin Wasan, Samuel Bernard,

International Journal of Hydrogen Energy,

Impact Factor:3.205

Deformation behaviour of commercially pure (CP) titanium under biaxial tension, Nedunchezhian Srinivasan, R. Velmurugan, Ravi Kumar, Satish Kumar Singh, Bhanu Pant,

Materials Science and Engineering: A,

Impact Factor:2.647

Ablation resistance of precursor derived Si-Hf-C-N(O) ceramics, Wasan Awin Eranezhuth, Soumya Sridar, Bakthavachalam Kousaalya Adhimoolam, Ravi Kumar,

Journal of the European Ceramic Society,

Impact Factor:2.933

Stress induced environmental damage in precursor derived SiBCN ceramics, J. Sudagar, M.G. Ramnath, A.B. Kousaalya,Ravi Kumar,

Ceramics International,

Impact Factor:2.758

Structural, functional and mechanical properties of spark plasma sintered gadolinia (Gd2O3), Eranezhuth Wasan Awin, Soumya Sridar, Rajashekhar Shabadi,Ravi Kumar,

Ceramics International,

Impact Factor:2.758

Kinetic analysis of the non-isothermal crystallization process, magnetic and mechanical properties of FeCoBSiNb and FeCoBSiNbCu bulk metallic glasses, Parthiban Ramasamy, Mihai Stoica,A. H. Taghvaei, K. G. Prashanth, Ravi Kumar and Jürgen Eckert,

Journal of Applied Physics,

Impact Factor:2.101

Ultra-high pressure densification and properties of nanostructured SiC, Branko Matovic, Fatima Zivic, Slobodan Mitrovic, Dragan Prsic, Vesna Maksimovic, Tatjana Volkov-Husovic, Ravi Kumar

Materials Letters,

Impact Factor:2.489

The role of the bimodal distribution of ultra-fine silicon phase and nano-scale V-phase (AlSi2Sc2) on spark plasma sintered hypereutectic Al?Si?Sc alloys, Raghukiran, N and Ravi Kumar

Materials Science and Engineering: A,

Impact Factor:2.647

Electric erosion induced microstructure and mechanical properties in spark plasma sintered Al-4.5wt%Cu alloy, S. Devaraj,Ravi Kumar, S. Sankaran,

Materials Performance and Characterization,

Impact Factor:-

2015

Viscosity and fragility of the supercooled liquids and melts from the Fe-Co-B-Si-Nb and Fe-Mo-P-C-B-Si glass-forming alloy systems, R. Parthiban, M. Stoica, I. Kaban, J. Eckert and Ravi Kumar,

Intermetallics,

Impact Factor:2.131

Structure evolution of soft magnetic (Fe36Co36B19.2Si4.8Nb4)100-x Cux (x = 0 and 0.5) bulk glassy alloys, Mihai Stoica, Parthiban Ramasamy, Ivan Kaban, Sergio Scudino, Mircea Nicoara, Gavin B.M.Vaughan, Jonathan Wright, J.Eckert and Ravi Kumar,

Acta Materialia,

Impact Factor:4.465

Effect of scandium addition on the microstructure, mechanical and wear properties of the spray formed hypereutectic aluminum?silicon alloys, Nadimpalli Raghukiran and and Ravi Kumar,

Materials Science and Engineering: A,

Impact Factor:2.567

Corrosion behavior of polymer-derived SiHfCN(O) ceramics in salt and acid environments, Sudagar Jothi, Lakshman Neelakantan and Ravi Kumar,

Ceramics International,

Impact Factor:2.605

Crack evolution and estimation of fracture toughness of HfO2/SiCN(O) polymer derived ceramic nanocomposites, Sujith Ravindran, Andre Zimmermann and Ravi Kumar

Advanced Engineering Materials,

Impact Factor:NA

Thermal conductivity of precursor derived Si?B?C?N ceramic foams using Metroxylon sagu as sacrificial template, Adhimoolam Bakthavachalam Kousaalya,Ravi Kumar, B.T.N. Sridhar,

Ceramics International,

Impact Factor:2.806

2014

Nature's Design for Superhydrophobicity in Tropical Leaves, Soumya Sridhar, Sangeetha Raman and Ravi Kumar,

Surface Innovations,

Impact Factor:1.438

Study of the influence of silicon phase morphology on the microstructural stress distribution in Al-Si alloys using object oriented finite element modeling, Nadimpalli Raghukiran, Aslam Kunhi Mohamed andRavi Kumar,

Advanced Engineering Materials,

Impact Factor:1.608

Corrosion of polymer-derived ceramics in hydrofluoric acid and sodium salts, Sudagar Jothi, Sujith Ravindran andRavi Kumar,

Advances in Science and Technology,

Impact Factor:NA

Room temperature strain rate sensitivity in precursor derived HfO2/Si-C-N(O) ceramic nanocomposites, R. Sujith andRavikumar,

AIP Advances,

Impact Factor:1.590

Influence of Hot Isostatic Pressing on the Microstructure and Mechanical Properties of a Spray Formed Al-4.5 % Cu Alloy, Devaraj S, Sankaran S,Ravi Kumar, GA Rao

Journal of materials engineering and performance,

Impact Factor:0.915

2013

Characterization of free carbon in as-thermolyzed Si-B-C-N ceramics from a polyorganoborosilazane precursor, Adhimoolam Bakthavachalam Kousaalya,Ravi Kumarand Shanmugam Packirisamy,

Journal of Advanced Ceramics,

Impact Factor:0.957

Influence of Spark Plasma Sintering Temperature on the Densification, Microstructure and Mechanical Properties of a Al-4.5 wt.% Cu Alloy, Devaraj,Ravi Kumar, Sankaran,

Acta Metallurgica Sinica (English Letters),

Impact Factor:0.467

Processing and characterization of polymer precursor derived silicon oxycarbide ceramic foams and compacts, Nedunchezhian Srinivasan, Ravindran Sujith,Ravi Kumar,

Journal of Advanced Ceramics,

Impact Factor:0.957

Small-Scale Deformation of Pulsed Electric Current Sintered Silicon Oxycarbide Polymer Derived Ceramics, R. Sujith, N. Srinivasan,Ravikumar,

Advanced Engineering Materials,

Impact Factor:1.608

Experimental investigation on the indentation hardness of precursor derived Si-B-C-N ceramics, R.Sujith,Ravikumar,

Journal of the European Ceramic Society,

Impact Factor:2.360

Indentation response of pulsed electric current sintered polymer derived HfO2/Si-C-N(O) nanocomposites, R.Sujith,Ravi Kumar,

Ceramics International,

Impact Factor:1.789

Silica based superhydrophobic coating by a single step process Adhimoolam Bakthavachalam Kousaalya, Nitish Garg and Ravi Kumar,

Surface Innovations,

Impact Factor:1.438

Barnacle adhesion on natural and synthetic substrates: Adhesive structure and composition, Sangeetha Raman, Lakshmi Karunamoorthy, Mukesh Doble, Ravi Kumar and R. Venkatesan,

International Journal of Adhesion and Adhesives,

Impact Factor:1.295

Processing and dry sliding wear performance of spray deposited hyper-eutectic aluminum-silicon alloys, Nadimpalli Raghukiran and Ravi Kumar,

Journal of Materials Processing Technology,

Impact Factor:1.953

2012

Synthesis and phase stability of precursor derived HfO2/Si?C?N?O nanocomposites, Sujith Ravindran, Adhimoolam Bakthavachalam Kousaalya, Ravi Kumar,

Ceramics International,

Impact Factor:1.751

2011

Construction and nanomechanical properties of the exoskeleton of the barnacle,Amphibalanus reticulatus,, Sangeetha Raman and Ravi Kumar

Journal of structural biology,

Impact Factor:3.41

Coarsening Induced Phase Transformation of Hafnia in Polymer Derived Si-Hf-C-N-O Ceramics, Sujith Ravindran, Kousaalya Adhimoolam, Ravi Kumar ,

Journal of the American Ceramic Society,

Impact Factor:2.272

Interfacial morphology and nanomechanics of the cement of the barnacle, Amphibalanus reticulatus on metallic and non-metallic substrata, Sangeetha Raman and Ravi Kumar,

Biofouling,

Impact Factor:3.396

Quasi-static uni-axial compression behaviour of hollow glass microspheres/epoxy based syntactic foams, Swetha C and Kumar R,

Materials & Design,

Impact Factor:2.2

2010

High temperature compression creep behavior of amorphous Si-B-C-N ceramics in controlled atmosphere, Ravi Kumar,Eswarapragada C, Zimmermann A and Aldinger F,

Ceramic Transactions: American Ceramic Society,

Impact Factor:-

Understanding the structure of the adhesive plaque of Amphibalanus reticulatus, Sangeetha R, Ravi Kumar, Venkatesan R, Doble M,

Materials Science and Engineering: C,

Impact Factor:2.177

Barnacle cement: an etchant for stainless steel 316L?, Sangeetha R, Ravi Kuma

Colloids and Surfaces B: Biointerfaces,

Impact Factor:2.780

2008

Effect of hafnium incorporation on the crystallization and mechanical behavior of a Zr-based bulk amorphous alloy, Baldwin F, Kumar R, Das K, Bandyopadhyay A and Gupta YM,

Materials Science and Engineering,

Impact Factor:1.806

2007

Oxidation induced effects on the creep properties of nano-crystalline porous Si-B-C-N ceramics, Ravi Kumar, Phillipp F and Aldinger F,

Materials Science and Engineering: A,

Impact Factor:1.806

Anelasticity of precursor derived Si-B-C-N ceramics, Ravi Kumar , Rixecker G, and Aldinger F,

Journal of the European Ceramic Society,

Impact Factor:1.562

2006

High temperature deformation behavior of nanocrystalline precursor derived Si-B-C-N ceramics in controlled atmosphere, Ravi Kumar, Mager R, Phillipp F, Zimmermann A and Rixecker G

Zeitschrift für Metallkunde,

Impact Factor:0.907

Processing, crystallization and characterization of polymer derived nano-crystalline Si-B-C-N ceramics, Ravi Kumar, Cai Y, Gerstel P, Rixecker G and Aldinger F,

Journal of materials science,

Impact Factor:0.901

2005

Crystallization and creep behavior of Si-B-C-N ceramics, Ravi Kumar, Prinz S, Cai Y, Zimmermann A, Berger F, Müller K and Aldinger F,

Acta Materialia,

Impact Factor:3.624

2004

High temperature deformation behavior of crystallized Si-B-C-N ceramics obtained from a boron modified poly(vinyl)silazane polymeric precursor, Ravi Kumar, Mager R, Cai Y, Zimmermann A, and Aldinger F

Scripta Materialia,

Impact Factor:2.481

2003

Creep behavior of a crystallized Si-B-C-N ceramic obtained from the polymer precursor T2-1 [B(C2H4Si(CH3)NH)3]n, Ravi Kumar , Zimmermann A and Aldinger F, Editors: David F. Bahr, Harriet Kung, Neville R. Moody, Kathryn J. Wahl,

MRS Proceedings,

Impact Factor:-

2001

Nano-crystalline ceramics by solid state thermolysis of organometallic polymers, Aldinger F, Prinz S, Janakiraman N, Ravi Kumar, Christ M, Weinmann M and Zimmermann A

International Journal of Self-Propagating High-Temperature Synthesis,

Impact Factor:-